How to choose 500kg medium frequency induction melting furnace for melting steel, stainless steel and pure copper?
The 500kg medium frequency induction melting furnace equipment should use an intermediate frequency power supply with a frequency of 1000Hz, a power of 250kW, and two induction melting furnaces with a capacity of 500kg. If three 500kg induction melting furnaces are used to melt steel, stainless steel and pure steel, it is only possible to add equipment. Since the task of melting stainless steel and pure copper is not a lot, it is a bit wasteful to use 3 sets, so I would like to use a 500kg medium frequency induction melting furnace, and add two inductors for melting stainless steel and pure copper. In the case of the workpiece, the sensor of the original molten steel induction furnace is removed and replaced with the corresponding inductor, and the furnace lining can be re-kneaded, because the induction dimensions of the three steels are the same, only the number of turns of the coil. Different, replacement is very convenient. The following are the main technical parameters of the molten steel you need: steel: heating temperature 1600 ° C, productivity 375 kg / h stainless steel: heating temperature 1650 ° C, productivity 350 kg / h pure copper: heating temperature 1300 ° C, productivity 400 kg / h if needed more For the parameters of the equipment and equipment quotation, contact us will have a very low price, please consult firstname.lastname@example.org for the specific price.
Copyright© 2007-2013 NO.6 Electric Mall All Rights Reserved