钢壳液压熔化炉

序号	项目	单位	参数	备注
1	变压器容量	KVA	1600	全铜
2	变压器一次电压	KV	10
3	变压器二次电压	V	2*750
4	额定熔化功率	Kw	1500
5	额定频率	Hz	500
6	整流串		12脉冲
7	逆变器		SCR并联
8	电源转换效率		0.97
9	功率因数	cos∮	> 0.92	额定功率下
10	恒功率输出时间		> 90%	熔化周期内
11	启动成功率		100%

2、感应电炉炉体

序号	项目	单位	参数	备注
1	额定容量	t	1.3-1.5
2	感应圈直径	mm	760	可按客户要求定制
3	装料高度	mm	1100	可按客户要求定制
4	炉衬厚度	mm	90-120	可按客户要求定制
5	额定工作温度	℃	1580	由炉衬材料决定
6	熔化率（1550℃）	t/h	≥1.7-2T	（热态）
7	耗电量	KWh/T	550-600左右	误差±5%

设备配置清单及价格

	名称	型号	简单配置	数量
电源部分	12脉800V中频电源柜	KGPS12-900-0.5S	KP1000A/3600V 台基 KK1500A/2500V 台基空开DW15-1000A 2台所有出水管带温度监控	1台
电源部分	电容柜	DR-900	满足1500KW使用	1台
炉体部分	钢壳炉体	GW-1.5T	磁轭高度1.2米感应圈内径760mm 水路带温控含漏炉报警	1台
	减速机	531	带过桥	1台
	水冷电缆	DH-SL-400		1套
冷却塔	电源水冷系统	BN-100T		1套
冷却塔	炉体水冷系统	BN-50T（双泵）		1套
变压器			自备

First, the complete set of equipment:

The system includes: an electric furnace 1 .5 t; a 1500 KW SCR frequency power; a rectifier transformer owned 1 600 KVA (10KV / 2 * 750V); a control box furnace convenient operating. A total of one set.

Second, equipment technical parameters:

1, medium frequency power supply

Serial number	project	unit	parameter	Remarks
1	Transformer capacity	KVA	1 600	all bronze
2	Transformer primary voltage	KV	10
3	Transformer secondary voltage	V	2* 75 0
4	Rated melting power	Kw	150 0
5	Rated frequency	Hz	500
6	Rectifier string		12 pulses
7	Inverter		SCR parallel
8	Power conversion efficiency		0.97
9	Power factor	Cos∮	> 0.92	Under rated power
10	Constant power output time		> 90%	Within the melting cycle
11	Start success rate		100%

2, induction furnace body

Serial number	project	unit	parameter	Remarks
1	Rated Capacity	t	1 .3 -1. 5
2	Induction ring diameter	Mm	7 6 0	Can be customized according to customer requirements
3	Loading height	Mm	1100	Can be customized according to customer requirements
4	Lining thickness	Mm	90-120	Can be customized according to customer requirements
5	Rated operating temperature	°C	1580	Determined by the lining material
6	Melting rate (1550 ° C)	t/h	≥1. 7-2T	(hot state)
7	power consumption	KWh/T	About 550-600	Error ±5%

Equipment configuration list and price

	name	model	Simple configuration	Quantity
Power section	12 pulse 800V IF power cabinet	KGPS12-900-0.5S	KP1000A/3600V platform KK1 5 00A/2500V platform Open DW15-1000A 2 sets All outlets with temperature monitoring	1 set
Power section	capacitor bank	DR-900	Meet 1 5 00KW use	1 set
Furnace section	Steel shell body	GW- 1. 5 T	The yoke height is 1.2 meters Induction ring inner diameter 7 6 0mm Waterway with temperature control Leaky furnace alarm	1 set
	Reducer	531	With bridge	1 set
	Water cooled cable	DH-SL-400		1 set
Cooling Tower	Power water cooling system	BN- 10 0T		1 set
Cooling Tower	Furnace water cooling system	BN- 5 0T (dual pump)		1 set
transformer			Bring your own