Equipment electrical maintenance knowledge

Spare parts required for 5000KW 8T intermediate frequency furnace

Time: 2019-08-15

First, the furnace part:

1, induction coil 1 set

Specifications: KGPS-5000KW 12-pulse 8t intermediate frequency furnace.

Inner diameter: 1280MM Total height: 2070mm Copper tube size: 65X35X4

9X2=18turns Fire line height: 1500mm turns distance: 20mm

Upper stainless steel tube 35X3 = 2 turns lower stainless steel tube 35X3 = 4 turns

Column length 2070X width 60X thickness 50 10 equal parts

2, yoke (2 cooling tubes) 4

Specifications: KGPS-5000KW 12-pulse 8t intermediate frequency furnace.

Appearance: 2070X240X120 Steel sheet size: 1970X110X176

3, the furnace body upper and lower short circuit ring each 2 sets

Specifications: KGPS-5000KW 12-pulse 8t intermediate frequency furnace.

Upper short circuit ring: outer diameter: 1950mm, 12 ;; copper tube 20X25X3

Lower short circuit ring: outer diameter: 1600mm; inner diameter: 1260; thick 4mm copper plate

4, furnace body rotary joint 2

Specification: DN150

5, joint bearing 2

Specification: GEG100ES

6, water-cooled cable 2

Specifications: Wire diameter: 980mm2 Length: 5.5mm One large triangular head, the other M76 live nut cap, rubber tube inner diameter: 76mm.

7, water-cooled cable copper washer 4

Specifications: copper ring: outer diameter 63mm, inner diameter: 58mm, thickness: 2mm.

 Brass ring: outer diameter 75mm, inner diameter: 55mm, thickness: 10mm.

Brass ring: outer diameter 75mm, inner diameter: 64mm, thickness: 9mm.



Understand Wikipedia: induction furnace
Recommended Reading: Intermediate Frequency Furnace
Similar Video
Similar Products