Hot search: 3KW electromag
Aluminum ingot
1T one belt tw
2T steel melt
Model : GS-ZP-750
Application : 1. Dielectric forging of round steel with a diameter of less than 100mm . 2 , Φ 400mm discs, Φ 150mm or less shaft quenching. 3. The machine guide rail is quenched. 4 , quenching treatment of auto parts and motorcycle parts. 5 , heat treatment of workpieces such as pliers, wrenches, screwdrivers, hammers, axes, etc.
750kw medium frequency induction heating equipment works :
The 750kw medium frequency induction heating device adopts the principle of electromagnetic induction heating. The alternating magnetic field generated by the inductor generates the induced current of the same frequency, and the distribution of the induced current in the workpiece is uneven, so that the surface of the workpiece is weak inside, and the core is close to 0. In order to achieve the purpose of quenching.
Technical parameters of 750kw medium frequency induction heating equipment:
model | GS-ZP-750 | input power | 750KW |
Maximum input current | 1125A | Operating Voltage | 342-430V |
Oscillating frequency | 2-4KHz | Inlet water pressure | 0.2-0.5Mpa |
Host volume | 810*530*1780 | Extension volume | 500*800*580 |
Water temperature protection point | 50 °C | body color | Gray + white |
750kw medium frequency induction heating equipment performance characteristics:
1. Adopt IGBT power device and unique inverter technology, 100% load continuation rate design, 24 hours operation under maximum power , high reliability.
2 , light weight, small size, simple installation, connected to 380V three-phase power, water, water, can be completed in a few minutes.
3 , the footprint is very small, easy to operate, can be learned in a few minutes.
4 , especially safe, the output voltage is lower than 36V , eliminating the danger of high voltage electric shock.
5 , the heating efficiency is up to 90% , the energy consumption is only 20% - 30% of the high frequency of the old-fashioned tube , almost no electricity in the standby state, and can work continuously for 24 hours.
6. The sensor can be disassembled and replaced freely, and the ultra-fast heating greatly reduces the oxidative deformation of the workpiece.
7. The device has the control function of constant current and constant power, which greatly optimizes the heating process of metal, realizes efficient and rapid heating, and the superior performance of the product is fully exerted.
8. Self-control type can adjust heating time, heating power, holding time, holding power and cooling time; greatly improve the quality of heating products and repeatability of heating, simplifying the operation technology of workers.
9 , 750kw medium frequency induction heating equipment has over-current, over-voltage, over-temperature, water shortage, lack of equal automatic protection function, and equipped with fault self-diagnosis alarm system.
10. The latest environmentally friendly products that replace the heating of dangerous substances such as oxygen, acetylene and coal, are safer and safer to produce without open flame.
750kw medium frequency induction heating equipment application:
1. Quenching of various gears, sprockets and shafts:
2 , heat treatment of various hardware tools and hand tools. Such as pliers, wrenches, screwdrivers, hammers, axes, etc.
3 , welding of mining tools, such as "one" word bit, column tooth bit, dovetail coal bit, riveting bit, various shearer picks, various types of roadhead picks.
4. Quenching treatment of machine bed rails in the machine tool industry.
5. Welding of various metal steel - steel, steel - copper, copper - copper equivalent metals or dissimilar metals;
6 , powder metallurgy sintering and metal melting;
7. Other plants that need to heat the metal;
Copyright© 2007-2013 NO.6 Electric Mall All Rights Reserved
