Hot search: 3KW electromag
Aluminum ingot
1T one belt tw
2T steel melt
Model: SD -SK-4000
Application: The equipment has the functions of continuous quenching, simultaneous quenching, segmental continuous quenching, and simultaneous quenching. It is mainly used for surface quenching of various shaft parts such as semi-axle, drive shaft, camshaft, spline shaft and gear shaft. Induction hardening of gears, rings, sprockets and flat parts.
Horizontal CNC quenching machine structure selection :
1. Horizontal CNC quenching machine adopts PLC industrial digital control system with advanced performance, convenient debugging and use, and can meet the quenching needs of complex workpieces to the greatest extent.
2 , the device balances the weight through the sprocket and chain.
3 , the guide rail adopts linear bearing, high precision, small friction and long service life.
4 , high degree of automation, high production efficiency.
5 , typical workpieces for horizontal CNC quenching machine: various shafts, step shafts, gear shafts, camshafts, half shafts, outer circumferences and end faces of disc parts.
6 , the use of profile structure fuselage, low cost, light weight, economical and practical.
7. Easy to use and maintain, low failure rate and no leakage, solve the problem of old-fashioned machine tools.
5 , can achieve the quenching method: continuous scanning quenching, simultaneous quenching, segmental continuous scanning quenching (segmentation degree setting, no need to switch, the same below), segmentation and simultaneous quenching.
9 , low operating costs. The workpiece running drive motor only needs 250W , and the whole machine consumes less than one-fifth of the mechanical equipment.
10 , horizontal CNC quenching machine tool electrical control system reserved quenching heating and cooling water control interface. The quenching process and the cooling process can be controlled according to the process requirements.
Selection of technical parameters of horizontal CNC quenching machine :
Maximum quenching length(mm) | 4000 | Maximum turning diameter (mm) | ≤ φ 500 |
Workpiece moving speed(mm/s) | 2-60 | Rotation speed (r/min) | 25-125 |
Tip movement speed(mm/min) | 480 | Workpiece weight (kg) | ≤ 1500 |
Input voltage ( V ) | Three phase 380 | Total motor power (kw) | 3 |
Horizontal CNC quenching machine features
The automatic CNC equipment quenching machine is aliased to the CNC quenching machine. On the basis of the original, plus the related technology of CNC, it has the following characteristics:
1. Fully automatic CNC equipment quenching machine adopts PC industrial digital control system with advanced performance, convenient debugging and use, and can meet the quenching needs of complex workpieces.
2 , automatic CNC equipment quenching machine can achieve quenching mode: continuous scanning quenching, simultaneous quenching, segmental continuous scanning quenching, segmentation and quenching.
3. Typical workpiece axes for machine tools: various shafts, stepped shafts, gear shafts, camshafts, half shafts, outer diameters and end faces of disc-shaped parts.
4 , machine tool electrical control system reserved quenching heating and cooling water control interface. The quenching process and the cooling process can be controlled according to the process requirements.
5 , low operating costs. The workpiece running drive motor only needs 250W , and the whole machine consumes less than one-fifth of the mechanical equipment.
6 , the use of profile structure fuselage, low cost, light weight, economical and practical.
7. Easy to use and maintain, low failure rate and no leakage, solve the problem of old-fashioned machine tools.
8. The guide rail adopts linear bearing with high precision, small friction and long service life.
Copyright© 2007-2013 NO.6 Electric Mall All Rights Reserved
