Trapezoidal aluminum ingot online lifting equipment

Introduce:Online trapezoidal ingots mentioned method of selecting devices,trapezoidal ingots mentioned principle of the device temperature online closed loop control system,the electrical apparatus mentioned trapezoidal ingots online Technical Note,ingot heating equipment manufacturer.
Related Products
Related Pictures
  • Introduction
  • Consultation

1, the sets of equipment for online trapezoidal ingots with raised temperature, the rated power of 350KW, rated frequency 200HZ, online raised temperature 100-120 deg.] C, to yield a cross-sectional ingot 4-5T 2300 mm2 per hour; external dimensions of the device 2500 × 1000 × 1300mm , the total weight is about 2.5T , and the water supply is about 15 t / h .

2 , trapezoidal aluminum ingots online equipment technical parameters

1. Electrical parameters

Transformer balance



Transformer secondary voltage



IF power supply rated power



Output voltage (furnace)



working frequency



2. Water system parameters

Water supply flow

t / h


Water supply pressure


0. 1 - 0.2

Inlet temperature


5 to 35 °C

Effluent temperature


< 50 °C

3 , electrical technical description of trapezoidal aluminum ingot online lifting equipment

The electrical part of the complete set includes the intermediate frequency power control cabinet, the temperature closed loop control system, the external control console, and the reactive compensation capacitor bank.

The intermediate frequency power supply is a thyristor frequency conversion device, the input voltage is 380V , 50Hz , and the output power


350KW , the power can be adjusted infinitely, the output frequency is 0.2KHz . The color of the cabinet is set according to user requirements, and the external dimensions are 2500 × 1000 × 1300mm , as shown above.

The IF control system is fully digital and has no relay control. Unique sweep mode with 100% startup success.


4 , trapezoidal aluminum ingot online lifting equipment temperature closed-loop control system principle :

The main control board of the intermediate frequency power supply is designed with a temperature closed-loop control interface. The temperature control instrument adopts the Japanese conductive SR93 with PID adjustment instrument, and the far-infrared optical fiber thermometer uses the German Opus CT series thermometer to measure the temperature -40-900 °C. Firstly, the heating temperature is set in the temperature control instrument. After the power is turned on, the thermometer measures the heating temperature in real time and feeds back to the temperature control instrument. The temperature control instrument compares the measured temperature with the set heating temperature and outputs an analog signal to the intermediate frequency main control board. The main control board automatically adjusts the thyristor firing angle according to the level of the signal, so that the power output power is adjusted following the level of the analog signal to achieve the purpose of temperature closed loop control. Because the temperature measurement system uses the imported aluminum thermometer, the temperature measurement is accurate. Optical fiber signal transmission ensures the stability of the reverse control and is realized by online automation. The user-friendly design of the temperature control table operation interface is convenient for adjustment and easy to observe. The entire system is highly automated and responsive, designed for aluminum testing.

Understand Wikipedia: induction heating
Recommended Reading: Induction heating furnace
Related Articles
Related Video