2T induction melting furnace

Introduce： Provides a good way to select the 2T induction melting furnace to provide 2T IF induction melting furnace price, provide 2T medium frequency induction melting furnace selection method, provide relevant configuration, transformer, incoming voltage, water cooling system, furnace structure selection Method and method of determining energy consumption .

Consultation

Related Products

Related Pictures

Introduction

Consultation

2T induction melting furnace consists of:

1600KW medium frequency power supply - capacitor cabinet - aluminum shell or steel shell furnace - hydraulic tilting furnace system - remote control box - ZXZ-140T closed loop cooling tower.

The price of 2T induction melting furnace

The price of the 2T induction melting furnace is calculated according to the power of the intermediate frequency power supply and the volume of the furnace body. Different configuration prices vary. This price is for reference only. Contact us will have a very low price, please consult the specific price.Firstfurnace@gmail.com

Serial number	Item name	Specification model	unit	Quantity	Price ¥
1	IF power cabinet	1600KW/2T/1000HZ	station	1	140000
2	Capacitor cabinet	0.75- 2 000-1S	set	1	60000
3	2T furnacesteel shell	GW- 2T	set	1	140000
4	Water cooled cable	LHSD- 400	set	4	20000
5	Model	2T furnace dedicated	only	1	1500
Total: ¥ 361500

The choice of 2T induction melting furnace related configuration

Intermediate frequencypower supply	Working form: 6- pulse or 12- pulse rectification , parallel inverter or series inverter structure ( one electric two furnace )
	Rectified form: 3- phase 6- pulse or 6- phase 12- pulse
	Output power: 1600 KW
	Power efficiency ≥98%
	Start mode: buffer frequency conversion start
	Startup rate: 100% (including heavy load)
	Rated frequency: 500HZ - 1000HZ
	AC voltage: 660v
	DC voltage: 500v-1000 V
	IF voltage: 750v-1500 V -3000v
	DC current: 800 A × 2
	AC current: 650 A × 2
	Input frequency: 50Hz
	Dimensions: 2200 mm × 15 00 mm × 2200 mm ( length × width ×height )
	Weight: 2000 KG or so
	Circulating water volume: 40 T / h with integrated layered water cooling tower ZXZ- 140 T ( 40 / 100 )
Furnace body	Rated capacity: 20 00 KG
	Maximum capacity: 2 300 KG
	Power factor: ≥0.9 8
	Working mode: one electric two furnace
	Melting time : about 45 minutes / furnace ( 1550 degrees cast iron)
	Working temperature: 1550 °C
	Loading height: 11 00mm Ring height: 1000mm , conductive coil height 880mm
	Loading diameter: 860 mm (upper mouth) inner diameter of the ring: 86 0mm ring copper tube is 25x40x5mm
	Maximum angle of the tilting furnace: 95°
	Yoke: There is an orientation of 0.2 7 water yoke. Liner thickness: 10 0 mm
	Outlet mode: side outlet
	Circulating water volume: 100 T / h Integrated layered water cooling tower ZXZ- 140 T ( 40 / 100 )
	Tilting method: hydraulic
	Unit power consumption: ≤ 520 ±5% kW.h/t 1550 ° C
	Working voltage: 3200V
	Dimensions: 2020 × 2260 × 1 7 50
	Weight: 60 00KG or so

2T induction melting furnace features :

1. Intelligent system, fast protection, durable thyristor, good starting performance, stable operation and convenient operation.

2 , the use of large copper discharge machine, increase the reactor power saving.

3 , induction melting furnace has over voltage, over current, water temperature, water pressure, short circuit, grounding and other protection systems, the operating panel has a working parameter display table , display various parameters of the working state, and there are faults, temperature and other indications.

2T induction melting furnace appearance structure

What information does the customer need to provide to the supplier before purchasing the induction melting furnace?

1. Induction melting furnace should have space for layout, and it is necessary to provide the area and layout of the plant.

2. The customer needs to provide the capacity of the transformer, the magnitude of the incoming line voltage, and the frequency of the incoming line voltage.

3. The induction melting furnace requires water-cooling equipment, and the induction melting furnace configuration contains water-cooling equipment.

4. The furnace structure of the induction melting furnace has a steel shell furnace body and an aluminum shell furnace body, and the customer needs to specify the furnace body structure.

5. The power supply of the induction melting furnace is an intermediate frequency power supply. The circuit structure of the intermediate frequency power supply is divided into an inverter parallel connection and an inverter series structure. The inverter series structure is energy-saving, the power factor is 0.98, and the line is stable. The inverter parallel structure is of the common type with a power factor of 0.92, which requires the customer to specify the line structure.

A good way to correctly and quickly select " 2T induction melting furnace "

1. Induction melting furnace transformer capacity selection

2T induction melting furnace should choose 1800KVA transformer. Secondary output voltage is 660v

Selection basis: value of transformer capacity = value of induction melting furnace power supply x 1.2

The transformer is a rectifier transformer. In order to reduce the interference of harmonics, it is used as far as possible for the special plane, that is, one induction melting furnace is equipped with a rectifier transformer.

1. Selection of 2T induction melting furnace inlet voltage

2T induction melting furnace power is 1600kw, three-phase five-wire system 660 V , 50HZ industrial power

Selection basis: For medium frequency power supply for induction melting furnace below 1000KW , three-phase five-wire 380 V and 50HZ industrial power are generally used . For induction melting furnaces above 1000KW , the focus is on using 660V incoming voltage .

1. According to the capacity requirements, determine the induction melting furnace with large tonnage.

The capacity of the induction melting furnace can be determined by the weight of the individual pieces and the weight of the molten iron required for each working day .

The standard tonnage is as follows:

250kg induction melting furnace

500kg induction melting furnace

2T induction melting furnace

3T induction melting furnace

5T induction melting furnace

4. Selection of 2T induction melting furnace body structure

The capacity of the 2T induction melting furnace is small. The recommended choice is: the furnace body of the hydraulic steel shell .

The aluminum alloy structure commonly known as the aluminum alloy structure with the reducer as the tilting furnace method. The induction melting furnace of the steel structure with the hydraulic cylinder as the tilting furnace is commonly called the steel shell furnace. The steel shell furnace is a steel structure, and the aluminum shell furnace shell material is an aluminum alloy .

Determination of energy consumption of seven, 2T induction melting furnace

The electric power of the induction melting furnace is higher and the power is saved. The energy consumption of the molten iron of 2T induction melting furnace : 5 5 0KW.h/t , energy consumption of molten steel 6 0 0 KW.h/t .

How to choose the induction melting furnace lining material?

1. Induction melting furnace lining material is divided into acid lining material, alkaline lining material, neutral lining material, coil cement, root melting material, medium frequency electric furnace tonnage, product molding temperature is different, it is very important to choose the appropriate lining material. jobs.

2. Induction melting furnace is a molten steel furnace using alkaline lining material mainly for fused magnesia. The induction melting furnace is a molten iron furnace. The acid lining material is a refractory material for quartz coreless induction furnace, and the material is acidic.

How to increase the melting speed of the induction melting furnace?

1. Increase the power of the induction frequency melting furnace intermediate frequency power supply.

2. Choose a reasonable charge size and the correct feeding method.

3. Appropriate molten iron outlet temperature.

Understand Wikipedia： induction furnace

Recommended Reading： induction melting furnace

Recommended Reading： 2T induction melting furnace price

PREV：1T induction melting furnace

NEXT：3 T induction melting furnace

[ BACK ]