Hot search: 3KW electromag
Aluminum ingot
1T one belt tw
2T steel melt
How to heat treat steel pipes using medium frequency induction heating furnace?
Continuous steel tube heat treatment equipment is more than stepping furnace and induction furnace. When selecting heat treatment equipment, the furnace type should be confirmed according to the requirements and requirements of the site. Small: You can choose a well type furnace. Large: You can use a continuous furnace. It requires a small deformation: you can use an induction furnace. The situation is different and the scheme is different. Generally, it is better to heat-treat the steel pipe with a continuous furnace; the trolley furnace is relatively better for the spheroidizing of the bearing steel because the spheroidization is actually long. However, the trolley furnace should consider the uniformity of temperature, and can be considered from the way of exhausting smoke and heating mode, as well as the circulation of furnace gas! Some steel pipes need rapid cooling after normalizing, and need uniform cooling to achieve the required crystal. grain. There are many forms of steel tube heat treatment furnaces, and the specific product selection is based on the product orientation to determine the form of the heat treatment furnace. At present, there are still many choices for induction heating, because the overall equipment takes up little space, and the steel tube is ideal for induction heat treatment when heat treatment. This heating equipment is suitable for various types of steel pipes, and the quality is well controlled. . The medium-frequency power supply is used to heat-treat the steel pipe, and the entire heat treatment production line can be automatically controlled.
Copyright© 2007-2013 NO.6 Electric Mall All Rights Reserved
