Hot search: 3KW electromag
Aluminum ingot
1T one belt tw
2T steel melt
Introduction to the principle of pneumatic building machine for medium frequency furnace
The medium frequency furnace pneumatic building machine is composed of a gas distributor, a cylinder sleeve, a gas hammer head, a length adjusting rod and a chain, and is mainly used for knotting the dry lining material of the intermediate frequency furnace, and the pneumatic building machine is using the air hammer to strike the intermediate frequency. The principle of the inner wall of the furnace makes the particles of the size of the lining material fill the gaps with each other to achieve the close effect of the lining material. The furnace building machine is designed with automatic rotating device, which can automatically rotate during use, and can adjust the input air volume at will to adjust the vibration force to ensure even knotting effect.
The medium frequency furnace building furnace is easy to operate. It needs to be lifted by one person. It is determined that the air source is opened after the knotting position. The pressure can be adjusted properly during the knotting process to ensure uniform knotting, and the vehicle can be operated evenly up and down at any time. mobile.
The working principle of the medium frequency furnace pneumatic building machine is different from that of the electric building machine. Compared with the electric building machine, it is more automatic, and it only needs to be hung with a crane to automatically knot. The air pump is used to vibrate to complete the knotting, and the pneumatic building machine can generally be equipped with a bottom vibrator, which directly saves labor.
Medium frequency furnace pneumatic building furnace is generally suitable for knotting more than 3 tons of large medium frequency electric furnace cost-effective!
Copyright© 2007-2013 NO.6 Electric Mall All Rights Reserved
