Aluminum ingot online heating medium frequency furnace

Introduce：Mainly used as an aluminum ingot heating furnace for various specifications of aluminum ingots and trapezoidal aluminum ingots.Provides the price of the medium-frequency furnace for the in- line heating of the aluminum ingot,how to choose the medium-frequency furnace for the in- line heating of the aluminum ingot , the method for calculating the power of the medium-frequency furnace for the in- line heating of the aluminum ingot , and the method for selecting the parameters of the medium-frequency furnace for the in- line heating of the aluminum ingot.Tailor-made for you to use the aluminum ingot online warming intermediate frequency furnace

Consultation

Related Products

Related Pictures

Introduction

Consultation

The equipment is mainly used as an aluminum ingot heating furnace for various specifications of aluminum ingots and trapezoidal aluminum ingots. The equipment is super energy-saving series inverter. The intermediate frequency power supply is a mechatronic structure. The complete equipment includes one series inverter medium frequency power supply and one ladder. A set of induction heaters, a set of 14 -inch color touch screen computer closed-loop control system, and a set of equipment horizontal moving rails.

微信图片_20180509115819.jpg

The equipment line for trapezoidal ingots with raised temperature, equipment rated at 3 00kw - 5 00kw, the nominal frequency of 200 - 300 HZ, online raised temperature 60- 2 50 ℃, 2350-3000 mm for a cross-sectional ingot hour yield above 5.5 T, because the device automatically adjusts the output power, the power consumption control apparatus tons 5 0kW.h / t to the; linear guide device designed at the bottom, 1.5 m laterally movable to facilitate ingots without the need Remove the device while heating.

Aluminum ingot intermediate frequency heating equipment technical parameters

A , comprehensive parameters
Serial number	project	Parameter requirement
1	Equipment form	Series inverter intermediate frequency heating
2	Equipment use	For aluminum ingots and trapezoidal aluminum ingot heating
3	Rated power	300kw-500kw
4	Maximum power	300kw +30%
5	Operating temperature	15 0 °C
6	Cabinet material	Stainless steel and steel structure
7	Mobile mode	Horizontal rail movement
8	Maximum range of movement	1.5 meters
9	Working noise	<85 decibels
11	Wiring way	The wiring line
12	Hourly output	5 T/h
13	Outlet temperature	150 °C
14	Unit power consumption	≤ 5 0kW.h/t
15	Adjustable frequency	Frequency adjustable 200-500hz
17	Fixed frequency	250hz
B , electrical parameters :
Serial number	project	parameter
1	Power supply	500kw / three phase or six phase
2	Number of rectifiers	6 veins and 12 veins
3	Inverter	SCR series inverter
4	Highest frequency	1000hz
5	Computer management system	Xp system management
6	Line voltage	380V
7	Sensor voltage	75 0V
8	Start success rate	100%
9	Power factor	Greater than 0.9 6
10	Harmonic quantity	No 5th and 7th harmonics
C , heat exchange cooling water system parameters
Serial number	project	parameter
1	Inlet pressure	0.2-0.4MPa
2	Inlet temperature	5-35 °C
3	Effluent temperature	< 4 5 °C

Mechanical technical parameters

A , heating index
Serial number	project	Trapezoidal aluminum ingot heating
1	structure	Steel structure
2	Material	A3 steel
3	Panel thickness	12 mm
4	Sensor copper tube material	T2 pure copper 99.9
5	Inductor copper tube specifications	Rectangular, 20 × 2 0 , wall thickness 3-5mm
10	Sensor number	By design
11	Sensor winding	Machine winding
12	waterway	1 in 1 out
14	Water cooling ring material	Copper tube
15	Heating body shell heat	< 5 5 °C

Serial number	project
1	insulation	The coil is double-layered with mica board
2	bolt	Ordinary carbon steel bolts are grade 8.8 . Other bolts made of stainless steel or copper
3	Water connection hose	Non-flame-retardant high-insulation rubber tube
4	Water collector	Stainless steel