Hot search: 3KW electromag
Aluminum ingot
1T one belt tw
2T steel melt
Medium frequency heating furnace mechanical device selection method
1, the mechanism comprising: a feeder and a feed device, a fast feeder, two sorting machines.
2. The heated workpiece is lifted to the loading machine by driving, and the materials are continuously arranged (manual intervention when needed). When it is necessary to feed the roller feeder, the turning mechanism automatically sends a blank to the roller feeder.
3. The quick discharge machine is designed with an upper pressure roller structure at the mouth of the furnace, the upper roller is a pressure roller, and the lower roller is a power roller. When the material is discharged to the mouth of the furnace, the upper pressure roller presses the material head and carries the material out of the sensor at a high speed. The first roller of the quick discharge machine is designed as a hexagonal roller. When the heat-adhesive material appears, the six-sided roller can realize the vertical movement of the discharge and open the bonding portion. This can effectively solve the problem of sticking.
4. The two sorting machines select the under temperature, over temperature unqualified materials and qualified materials respectively through temperature detection, and the unqualified materials fall into the bin.
5. The mechanical structural design strength is 3 times higher than the static pressure design strength.
6, all mechanical parts need to be lubricated, using hand pump to concentrate lubrication.
7, the mechanical mechanism is accurate positioning, reliable operation, reasonable structure of the complete set of equipment, small maintenance, easy to maintain and maintain. (Using stainless steel material, the bearing part is protected from heat (water), the electrical part has anti-burning, and there is sufficient maintenance space, etc.)
8, the entire set of equipment fully considers the impact of ambient temperature on the equipment.
9, copper is produced by well-known domestic manufacturers.
10, there are mechanical, electrical shockproof, anti-loose, anti-magnetic (copper or other non-magnetic materials connected) measures.
Copyright© 2007-2013 NO.6 Electric Mall All Rights Reserved
