Hot search: 3KW electromag
Aluminum ingot
1T one belt tw
2T steel melt
Determination of the capacity of 1T intermediate frequency melting furnace
The capacity of the 1T intermediate frequency melting furnace is explained as follows:
The height of the sensor of the 1T intermediate frequency melting furnace is 820mm. When the knot is knotted, the bottom surface of the die is 90mm lower than the coil, that is, one and a half coil. The molten steel surface in the furnace is 30mm lower than the top surface of the inductor, that is, the half turn coil, the liquid iron. The density is 7.2×103kg/m3. The diameter of the die is φ510 (middle). The weight of liquid iron is 1030kg. After several furnaces of melting, the capacity will gradually increase due to the erosion of molten iron on the lining, and the capacity will be greater than 1030kg.
Copyright© 2007-2013 NO.6 Electric Mall All Rights Reserved
