3T induction melting furnace configuration selection table
3T induction melting furnace configuration selection table | |||
Serial number | Name | quantity | Remark |
1 | IF power supply cabinet | 1 set | 2200KW, 350Hz dual power supply |
2 | Capacitor cabinet | 2 sets | Non-standard GGD |
3 | Incoming control cabinet | 2 sets | Standard GGD |
4 | Furnace | 2 sets | 3 tons of steel shell, magnetic yoke, hydraulic furnace with manual rotating furnace cover, without dust removal device |
5 | Hydraulic system | 1 set | Hydraulic pump station and connecting pipeline |
6 | Console | 2 sets | For tilting |
7 | Low-voltage electrical control cabinet | 1 set | Control hydraulic, water system, etc. |
8 | Water-cooled cable | 2 sets | 8 pieces |
9 | Crucible mold | 2 pcs | ≥8mm steel plate |
10 | Furnace Lining | 2 servings | Quartz sand and neutral material each |
11 | Furnace building tools | 1 set | 1 pneumatic furnace lining vibrator, 1 electric furnace bottom vibrator, 1 furnace wall ramming plate |
12 | Furnace lining ejection mechanism | 2 sets | Including oil cylinder, connecting oil pipe, control valve and frame type installation and ejection mechanism |
13 | Furnace lining detection device | 2 sets | self made |
14 | For power supply cooling Plate exchanger | 2 sets | 1 set of 3 tons, 1 set of 1 tons |
15 | Intermediate frequency power water pumping station | 2 sets | 3 tons and 1 ton each with 1 set of double machines and double pumps |
16 | Water tank | 2 pcs | 3 tons, 1 ton each, 1 stainless steel or galvanized material |
17 | Cross flow cooling tower for electric furnace | 1 set | 3 tons and 1 ton electric furnace share 1 tower |
18 | Furnace water cooling pump station | 1 set | Double pumps |
19 | Emergency generator | 1 set | 3 tons, 1 ton and 2 electric furnaces shared |
20 | Emergency pump | 2 sets | 3 tons, 1 ton and 2 electric furnaces shared Connect with spare water pipe |
twenty one | Rectifier 12-pulse transformer | 1 set | 3 ton furnace dedicated |
twenty two | Automatic control display system | 1 set | PLCTWPS (Siemens) |
twenty three | Installation materials | 1 set | The pipes, valves, elbows, etc. and labor required for the water cooling system, the pipes, joints, etc. and labor required for the hydraulic system, and the standard copper bars, cables, etc. and labor required for the power supply system. The pipe material is stainless steel. |
twenty four | 1 ton furnace changeover switch | 1 set | Electric, water-cooled |
25 | Furnace mouth, furnace bottom, pouring block, etc. | 2 sets | spare |
26 | Main board | 1 piece | spare |
27 | Rectifier SCR | 2 fast | spare |
28 | Inverter SCR | 2 fast | spare |
29 | Digital oscilloscope | 1 piece | For maintenance |
Copyright© 2007-2013 NO.6 Electric Mall All Rights Reserved