Hot search: 3KW electromag
Aluminum ingot
1T one belt tw
2T steel melt
Model : GS-ZP-200
Application : 1. For the whole heating of workpieces such as round steel, square steel and bar with diameter below 120 . 2 , quenching treatment of auto parts and motorcycle parts. 3 , heat treatment of workpieces such as pliers, wrenches, screwdrivers, hammers, axes, etc. 5 , non-ferrous metal smelting.
200kw medium frequency induction heating equipment works:
The 200kw medium frequency induction heating device adopts the principle of electromagnetic induction heating. The alternating magnetic field generated by the inductor generates the induced current of the same frequency, and the distribution of the induced current in the workpiece is uneven, so that the surface of the workpiece is weak inside, and the core is close to 0. In order to achieve the purpose of heating.
Technical parameters of 200kw medium frequency induction heating equipment:
model | GS-ZP-200 | input power | 200KW |
Maximum input current | 300A | Operating Voltage | 342-430V |
Oscillating frequency | 2-4KHz | Inlet water pressure | 0.2-0.5Mpa |
Host volume | 810*530*1780 | Extension volume | 500*800*580 |
Water temperature protection point | 50 ° C | body color | Gray + white |
200kw medium frequency induction heating equipment performance characteristics:
1. Unique inverter technology, 100% load continuation rate design, 24 hours operation under maximum power , high reliability.
2 , light weight, small size, simple installation, connected to 380V three-phase power, water, water, can be completed in a few minutes.
3 , adjustable heating time, heating power, holding time, holding power and cooling time, greatly improving the quality of heating products and heating repeatability, simplifying the operation technology of workers.
4 , especially safe, the output voltage is lower than 36V , eliminating the danger of high voltage electric shock.
5 , 200kw medium frequency induction heating equipment efficiency of up to 90% , energy consumption is only 20% - 30% of the old-fashioned tube heating equipment , almost no electricity in standby mode.
6 , the footprint is very small, easy to operate, can be learned in a few minutes.
7. The sensor can be disassembled and replaced freely, and the ultra-fast heating greatly reduces the oxidative deformation of the workpiece.
8. The equipment has over-current, over-voltage, over-temperature, water shortage, and lack of perfect automatic protection functions, and is equipped with a fault self-diagnosis alarm system.
9. The latest environmentally friendly products that replace the heating of dangerous substances such as oxygen, acetylene and coal, are safer and safer to produce without open flame.
10 , with constant current and constant power control function, greatly optimize the metal heating process, achieve efficient, rapid heating, the product's superior performance is fully exerted.
200kw medium frequency induction heating equipment application:
1. Quenching of various gears, sprockets and shafts:
2 , hardware tools quenching
3 , through-heat forging of all parts within 100 diameter ;
4. Quenching treatment of machine bed rails in the machine tool industry.
5. Welding of various diamond composite drill bits;
6 , hot rolled twist drill ;
7. The enthusiasm of various high-strength bolts and nuts;
8. Welding of various accessories such as picks, drill heads, drill pipes, coal drill bits and drill bits;
9. Welding of mining tools, such as “one” word bit, column tooth bit, dovetail coal bit, riveting bit, various miner picks, and welding of various roadhead picks.
10 , powder metallurgy sintering and metal melting;
11 , special fastener heat treatment
12 , welding of various carbide heads and saw blades;
Copyright© 2007-2013 NO.6 Electric Mall All Rights Reserved
