15KW electromagnetic Heating stove

Introduce：15KW electromagnetic heating furnace basic selection method, 15KW electromagnetic heating furnace description and schematic diagram, 15KW electromagnetic heating furnace applicable range, electromagnetic induction heating furnace operating costs

Consultation

Related Products

Related Pictures

Introduction

Consultation

Three-phase 5KW/380V , 8KW/380V , 10KW/380V , 15KW/380V electromagnetic heating controller. It is a digital electromagnetic heating system developed by the company based on the company's fifth-generation DSP control platform. Compared with the previous electromagnetic heating control board, it adopts all-digital operation processing, German Infineon magnetic drive, and all-digital phase-locking tracking technology. It has the characteristics of high performance stability, high thermal efficiency, easy installation and low failure rate. The application is very wide, the appearance is beautiful, the installation is convenient, the debugging is simple, and the application is reliable. It can be widely used in the heating furnace, mechanical plastic, rubber equipment, chemicals, molds, commercial induction cooker, a variety of heating pipes, and the like conveying surface heating oil heating industries.

Principle of electromagnetic heating heating furnace
Introduction to frequency conversion electromagnetic heating furnace:
The electromagnetic heating furnace adopts the principle of electromagnetic induction heating, which uses AC rectification to convert it into DC power and then inverts it into a high-frequency alternating current, which acts on the inductor coil to generate an alternating magnetic field, so that the furnace body generates numerous small eddy currents, and the furnace is heated by eddy current collision. Body, so that the water in the furnace body is heated, the water and the coil are larger than 20mm insulation and heat insulation material can achieve 98% thermal efficiency , environmental protection safety, short warm-up time and fast heating speed. The electromagnetic heating furnace system comprises: a frequency conversion electromagnetic heating controller, an intelligent operation control system, an electromagnetic coil, a heating furnace body and a protection circuit.

Basic selection method of 100-160kW electromagnetic heating furnace

model	unit	SD-100KW	SD-120KW	SD-140KW	SD-160KW
rated power	KW	100KW	120KW	140KW	160KW
Rated current	A	150	180	210	240
Line voltage /frequency	V/HZ	380/50	380/50	380/50	380/50
Line cross section	Mm2	3 × 35	3 × 35	3 × 50	3 × 75
Protection level	IP	33	33	33	33
Thermal conversion efficiency	%	≧ 98	≧ 98	≧ 98	≧ 98
Shell heat dissipation	%	≦ 2	≦ 2	≦ 2	≦ 2
Heating Z large capacity	L	1800	2000	2500	3000
Heating Z pressure	Mpa	0.25	0.25	0.25	0.25
Pump Z small flow	L/min	120	144	168	192
Water tank capacity	L	100	120	140	160
Heating Z high temperature	OC	90	90	90	90
Holding temperature	OC	5	5	5	5
Hot water yield65OC	L/min	33	40	46	53
Dimensions	Mm	1500 × 800× 800	1500 × 800 ×800	1500 ×800 × 800	1500 × 800× 800
Access interface	DN	40	40	40	40
Heating area	M2	1000-1300	1200-1500	1400-1800	1600-2000
Heating space	M3	3400-4500	4000-5500	5000-7000	6000-8000
Meter measurement selection	A	Optional reasonable current transformer, three-phase watt-hour meter 1.5-6A

Advantages of electromagnetic heating furnace
1 , high heat conversion rate

Using electromagnetic induction heating technology, high-frequency electromagnetic eddy current heating, heat conversion rate of up to 98% , can drive the radiator. The floor heating pipe dissipates heat, the heating rate is extremely high, and the efficient and quick 1-3 minutes outlet temperature reaches 60degrees.

2 , energy saving and environmental protection

Electromagnetic induction heating is more than 30% energy saving than ordinary resistance heating . It responds to the national “coal to electricity” blue sky environmental protection policy, cleansing electric energy, and truly achieves zero emissions and zero pollution.

3 , electromagnetic heating truly achieve the separation of water and electricity, avoid the safety hazards of ordinary electric boilers, product constant power, soft start control, start no current impact, and have over-current, dry burning, over-temperature and other early warning functions, use more Safety.

4 , intelligent temperature control

Support PLC programmable operation, support RS485 communication, human-machine interface interaction, remote WIFI remote control using microcomputer programmable controller control, power, water temperature controllable, timed temperature, convenient and convenient.

5 , stable quality and long service life

The heating element of the electromagnetic heating furnace does not heat up, but the furnace itself is rapidly heated, which greatly prolongs the service life of the heating element, and the overall design life is 50 years.

6 , low operating costs

Electromagnetic heating has high efficiency, fast heating and no scaling. Maintenance free. Set your own heating time, temperature standards, and operating costs yourself. Greatly reduced operating costs.

7 , easy to install, practical and convenient

The refined design, butt access, water outlet, the user's original radiator, water heater, floor heating pipe, no need to replace, can be connected to run. When you turn it on, customers can set it according to their needs. The machine automatically remembers the memory, and each time it is started, it will be set according to the memory, and the intelligent automatic constant temperature operation

8 , healthy and comfortable

Frequency conversion electromagnetic induction heating heating, fast heating, high thermal efficiency, good thermal stability, air is not dry, air is more comfortable, no air conditioning disease caused by microorganisms generated by air conditioning, improved outdoor temperature is low, air conditioning heating does not work, up to Less than ideal heating effect

9 , small size

The electromagnetic heating furnace is small in size and beautiful in appearance. It can be installed in the living room, bedroom, office and other places. Minimize the possession of space.

10 , a wide range of applications

Electromagnetic heating furnaces have a wide range of applications. They can be used for central heating or household heating. From residential quarters to self-built houses, from enterprises and institutions to ordinary shops, all places that require heating, such as hotels, schools, units, and houses, are involved.

Electromagnetic heating stove product selection table
Model item		unit			SD -10kW			SD -12kW			SD -15kW			SD1 -20kW			SD1 -30kW			SD1 -40kW
rated power		kW			10kW			12kW			15kW			20kW			30kW			40kW
Rated current		A			15			18.2			27.2			36.3			45.4			60.8
Supply voltage /frequency		V/Hz			380/50			380/50			380/50			380/50			380/50			380/50
Power line cross-sectional area		Mm2			≥4			≥4			≥6			≥10			≥10			≥16
Electrical protection level		IP			33			33			33			33			33			33
Thermal conversion efficiency		%			≥98			≥98			≥98			≥98			≥98			≥98
Shell heat dissipation		%			≤2			≤2			≤2			≤2			≤2			≤2
Heating system maximum capacity		L			185			222			278			370			555			740
Heating system maximum pressure		Mpa			0.2			0.2			0.2			0.2			0.2			0.2
Pump with minimum flow		L/min			16			20			25			32			50			67
Expansion tank capacity		L			10			12			15			20			30			40
Heating maximum temperature		°C			90			90			90			90			90			90
Low temperature protection temperature		°C			5			5			5			5			5			5
Hot water yield 65 °C		L/min			3.25			3.9			4.88			6.5			9.8			13
Dimensions		Mm			1150800400			1150800400			1150800400			1150800400			1150800400			1800900400
Access interface		DN			40			40			40			40			40			40
Heating area		M2			100-120			120-150			150-180			200-240			300-360			400-480
Heating space		M3			320-400			385-600			530-670			640-800			960-1200			1280-1600
Meter selection		A			15A (60A)			15A (60A)			15A (60A)			15A (60A)			15A (60A)			30A (100A) three phase

Model item	unit			SD -50kW			SD -60kW			SD -70kW			SD -80kW			SD -100kW			XHY -CN-120kW			SD -140kW
rated power	kW			50kW			60kW			70kW			80kW			100kW			120kW			140kW
Rated current	A			75			90			105			120			150			180			210
Supply voltage /frequency	V/Hz			380/50			380/50			380/50			380/50			380/50			380/50			380/50
Power line cross-sectional area	Mm2			3×25			3×25			3×25			3×35			3×35			3×50			3×50
Electrical protection level	IP			33			33			33			33			33			33			33
Thermal conversion efficiency	%			≥98			≥98			≥98			≥98			≥98			≥98			≥98
Shell heat dissipation	%			≤2			≤2			≤2			≤2			≤2			≤2			≤2
Heating system maximum capacity	L			920			1100			1290			1480			1840			2200			2576
Heating system maximum pressure	Mpa			0.2			0.2			0.2			0.2			0.2			0.2			0.2
Pump with minimum flow	L/min			60			72			84			96			120			144			168
Expansion tank capacity	L			50			60			70			80			100			120			140
Heating maximum temperature	°C			90			90			90			90			90			90			90
Low temperature protection temperature	°C			5			5			5			5			5			5			5
Hot water yield 65°C	L/min			16.25			19.5			22.75			26			32.5			39			45.5
Dimensions	Mm			1800900400			1800900400			1800900400			1800900400			1800900400			1800900400			1800900400
Access interface	DN			40			40			40			40			40			40			40
Heating area	M2			500-600			600-700			700-800			800-900			1000-1300			1200-1500			1400-1800
Heating space	M3			1720-2390			2100-2850			2580-3560			1460-1810			3450-4780			4150-5740			5150-7100
Meter selection	A			30A (100A)three phase			Need professional electrician to install transformers reasonably, three-phase electric meter 1.5-6A

Model item			unit			XHY -CN-160kW			SD -180kW			SD -210kW			XHY -CN-240kW			SD -360kW			SD -480kW
rated power			kW			160kW			180kW			210kW			240kW			360kW			480kW
Rated current			A			240			270			315			360			540			720
Supply voltage/ frequency			V/Hz			380/50			380/50			380/50			380/50			380/50			380/50
Power line cross-sectional area			Mm2			3×75			3×75			3×75			3×95			3×120			3×180
Electrical protection level			IP			33			33			33			33			33			33
Thermal conversion efficiency			%			≥98			≥98			≥98			≥98			≥98			≥98
Shell heat dissipation			%			≤2			≤2			≤2			≤2			≤2			≤2
Heating system maximum capacity			L			2960			3300			3870			4400			6600			8800
Heating system maximum pressure			Mpa			0.2			0.2			0.2			0.2			0.2			0.2
Pump with minimum flow			L/min			192			216			252			288			432			576
Expansion tank capacity			L			160			180			210			240			360			480
Heating maximum temperature			°C			90			90			90			90			90			90
Low temperature protection temperature			°C			5			5			5			5			5			5
Hot water yield 65 °C			L/min			52			58.5			68.25			78			117			156
Dimensions			Mm			1800900400			1800900750			1800900750			1800900750			1800900750			1800900750
Access interface			DN			40			80			80			80			80			80
Heating area			M2			1600-2000			1800-2200			2100-2500			2400-3000			3600-4300			4800-5500
Heating space			M3			2920-3620			6300-8550			7750-10700			8300-11480			12450-17220			16600-22960
Meter selection			A			Need professional electrician to install transformers reasonably, three-phase electric meter 1.5-6A

Operating cost of electromagnetic induction heating furnace

Electromagnetic heating operation cost calculation

The electricity heating operation cost of one square meter in the whole heating period can be calculated according to the following formula:

Unit area heat load × heat load coefficient × daily working time × heating period days × electricity price unit price = heating cost per unit area of the entire heating period

Electromagnetic heating operation status can be divided into the following types:

( 1 ), the user is at home for a long time, the electric heating furnace is running 24 hours a day, in order to save operating costs, the heating temperature at night is appropriately lowered.

The electromagnetic heating cost is: 0.05kw/m2 × 0.6 × 10 hours × 120 days × 0.52 yuan / degree = 18.72 yuan / M2

( 2 ), office workers, users only at noon, at home at night, electric heating furnace intermittent operation in 3 periods.

The electromagnetic heating cost is: 0.05kw/ M2 × 0.6 × 6 hours × 120 days × 0.52 yuan / degree = 11.23 yuan / M2

( 3 ), office, 5- day work system, heating only from Monday to Friday, electric heating stove running during the day, the rest of the time running in anti-freeze state.

The electromagnetic heating cost is: 0.06kw/ M2 × 0.6 × 6 hours × ( 120 days × 5/7 ) × 0.52 yuan / degree = 9.62 yuan / M2

( 4 ), the school, in addition to the five- day work week , there is a 35- day holiday, heating time is relatively short.

The electromagnetic heating cost is: 0.06kw/ M2 × 0.6 × 6 hours × [ ( 120 days - 35 days) × 5/7 × 0.52 yuan / degree = 6.81 yuan / M2

Using the above calculated value × actual heating area (saleable area) of the room, it is possible to calculate the operating cost of the entire heating period. If the user reasonably adjusts or closes the heating device that does not require a heating room (such as an unused room, bathroom or kitchen), the actual The heating area is reduced accordingly, and the heating costs are reduced accordingly.

Note: 0.07kw/ M2 is a standard energy-efficient building requiring winter heating electric load of 55 - 70w / M2 , electromagnetic heating is more than 35% energy saving than ordinary electric heating , 0.52 yuan / kW is the current unit price of electricity in Beijing. If the peak and valley electricity price can be calculated at an average of 0.35 yuan / kWh, the user's heating cost for a long time at home is 12.6 yuan, and the heat load coefficient of 0.6 means the initial period of the heating period. At the end of the period, the indoor heat load is small, and during the coldest period of the heating period, the indoor heat load is large, with an average of 0.6 . Actual heating area: The building area is multiplied by 0.78 , minus the practical area of the room without heating.

The electromagnetic heating furnace is similar to electric water heaters and air conditioners. The working time is proportional to the heat load demand of the room. The electricity price per unit, heating cycle and electric heating furnace work time are different in each region, such as the northeast region. The weather is cold, but his house insulation measures are better (the wall thickness is 0.5 meters, the external insulation material, the window is double-vacuum glass), and the electricity bill is relatively cheap.

Understand Wikipedia： induction heating

Recommended Reading： electromagnetic Heating stove

ALL GATEGORIES

15KW electromagnetic Heating stove