List of equipment components for aluminum and aluminum alloy rod continuous casting and rolling production line

Technical

Equipment technical parameters

List of equipment components for aluminum and aluminum alloy rod continuous casting and rolling production line

Time: 2019-07-11

List of equipment components for aluminum and aluminum alloy rod continuous casting and rolling production line

Serial number		name	use	Specification model	Quantity	unit	Manufacturer	Remarks
Aluminum rod continuous casting and rolling unit			Aluminum rod rolling
1	Four-wheel zero point continuous casting machine		Casting		1	set
	Pouring		Aluminum water transmission		1	set		Automatic casting
	Pouring lining		Aluminum water transmission		1	set
	Pouring lift motor		Pouring and lifting		1	station
	Moving the motor before and after pouring		Pouring movement		1	station
	Crystallization wheel		Billet forming		1	One		“ H ”type, diameter1600mm , cavity area ≥ 128 0mm 2
	motor		transmission		1	station		Frequency
2	Front tractor		Traction		1	set
	Transmission case		transmission		1	station
	Motor		transmission		1	station
3	Rolling shear		Blank cutting		1	set
	Transmission case		transmission		1	station
	Roller blade		Cutting		4	Piece
	Motor		transmission		1	station
4	Continuous rolling mill		Rolling
	Active feeding		Feeding		1	set		Pneumatic clamping, automatic control
	Rack system		Rolling	“ Y ” type three-roller1 2 rack	1	set		The nominal roll diameter is ¢ 255 , using round- anti-triangle -positive triangle -round hole type
	Main motor		transmission		1	station		DC speed regulation
	Gearbox drive system		transmission		1	set		Overall molding of the box
5	Line take-up unit		Take over
	Lower frame		Plunger, cooling		1	set		Water-filled roller type oil-free lead rod, stainless steel tube
	Wireframe trolley		Take over		2	One		Each frame weighs 2 to2.5 tons
	Active traction device		Aluminum rod traction		1	set
	Motor		transmission		1	station		Frequency
6	Oil lubrication system		Thin oil circulation
	Oil pump motor		transmission		2	station
	filter		filter		2	station
	Plate heat exchanger		Heat exchange		1	station
	tank		Loading oil		1	One
7	Emulsion lubrication system		Emulsion cycle		1	set
	Lotion pump		Emulsion delivery		2	station
	Emulsion pump motor		transmission		2	station
	filter		Emulsion filtration		2	station
	Plate heat exchanger		Emulsion cooling		1	station		stainless steel
	Heat exchanger water pump		cool down		2	station		Can be considered to be shared with the foundry pump, specific seller design
	Pipe fittings, flanges, valves		Pipe connection		1	set		Connected to the device body, the remaining intermediate pipeline is provided by Party A
	Pipe fittings, flanges, valves		Pipe connection		1	set
8	5 tons of melting and holding furnace							The supplier provides the basic map, and the buyer is responsible for the basis.
9	Online degassing