Steel billet rolling equipment

Introduce：billet (billet, slab, billet round, rectangular blank) line up in hot rolling the billet through the device before entering the rolling mill, rolling the billet to provide equipment price, how to select a billet rolling plant, steel rolling. Equipment temperature control selection method, selection method of billet rolling equipment parameters. Tailor your slab rolling equipment for your needs.

Consultation

Related Products

Related Pictures

billet induction heating furnace coil

Introduction

Consultation

Equipment name: billet rolling equipment
Non-standard customization: yes
Billet size: width 50mm × 50mm or more, length 0.5 meters or more
Slab rolling equipment is excellent , technology leading ! Intelligent series resonant induction heating power control, billet heating equipment energy saving 10% -30% , customized human-machine interface, highly user-friendly operation instructions, available in different countries and regions The corresponding language switching, the square billet heating furnace is simple to operate.

The billet rolling equipment adopts PLC to control its characteristics:
● Provide remote operation console with touch screen or industrial computer system according to user requirements.
● Specially customized human-machine interface, highly humanized operation instructions, one person can operate the whole set of equipment, saving labor and expenses.
● All-digital, high-depth adjustable parameters, as long as the input steel type, size, equipment automatically call the relevant parameters, no manual recording, review, input. High-precision history curve function. U-disk or backup network may be, data can be permanently stored.
● Strict grade management system, square billet induction heating furnace with a key reduction system. (If there is a problem with the adjustment, or if you want the device to return to its original state, you can restore the original data with the push of a button)
The billet rolling equipment adopts the intermediate frequency series resonant power supply to control its characteristics:
● Parallel resonance design, phase shifting and power adjustment, the equipment is mature and stable; it has more advantages in the high power range above 3000KW .
● DSP control, the speed capture lock phase starts, meets frequent start and stop, and has high success rate.
● Variable frequency variable load adaptation, frequency adaptation range 200-10000Hz, induction furnace replacement automatic matching, no manual adjustment is required.
● T2 copper copper row in the cabinet , sandblasted and passivated; low leakage and anti-oxidation, effectively reducing line loss.
● Full touch screen control, pure digital setting, complete process record and strict hierarchical authority. The main parameters can be restored to the factory settings with one key.
● Power single unit power 50-6000KW , frequency 200-10000Hz.
The billet rolling equipment induction heating coil is a contour design. The copper tube is wrapped with T2 oxygen-free copper. The wall thickness of the copper tube is ≥2.5mm. The furnace body insulation material is made of imported materials from the United States. It has high strength, high temperature resistance and longer service life. Long; steel billet secondary heating equipment furnace body inlet and outlet end is sealed with 5mm copper plate, which greatly reduces magnetic leakage and prolongs service life. The frame structure of the furnace body is made of non-magnetic stainless steel or aluminum alloy to reduce the influence of magnetic flux leakage and heat on other devices. Square steel billet induction heating equipment is equipped with one water-cooled idler roller between each two furnaces. Each roller is equipped with a variable frequency speed regulating motor to ensure stable and uniform operation of the billet.
The billet is driven by the motor and the idler at a constant speed in the induction heater. The billet is heated uniformly, the heat loss is less, and the heating efficiency is high. The discharge port is equipped with the American Leitai thermometer to display the billet heating temperature in real time and keep the workpiece. Uniformity. The slab heating furnace is automatically higher than the general equipment, which is convenient for operation and has a high degree of online intelligence for other equipment. The billet rolling equipment is heated evenly. The billet after heat treatment has no cracks, no over-burning, no straightening machine for straightening, tensile strength and toughness, all of which can meet customer needs.
Slab rolling equipment use conditions and user-owned parts:
1 . The user provides the high-voltage side power supply of the transformer, the electrical connection line of the transformer to the low-voltage distribution cabinet and the power supply cabinet, and the console enters the line.
2 . Altitude: ≤ 2000m; Relative humidity: ≤ 90%
3 . Equipment cooling: The total flow of the whole set of equipment is greater than or equal to 200 cubic meters per hour. Pressure ≥ 0.3MPa
4 . No conductive dust and corrosive gases.

Billet rolling equipment parameter summary table

Billet size	Billet length	Heating temperature	Production capacity
60 × 60mm	3m-4m	1150	25T/H
75 × 75mm	3m-4m	1150	25T/H
100 × 100mm	2m	1150	7T/H
120 × 120mm		1150	30T/H
120 × 120mm	11.5-12.5m	1150	90T/H
125 × 125mm	6m	1150	8T/H
125 × 125mm	2m	1150	7T/H
130 × 130mm	6m	1150	50T/H
135 × 135mm	6m	1150	100T/H
150 × 150mm	11.5-12.5m	1150	70T/H

What is the billet rolling equipment used for?

The billet rolling equipment is used for induction heating such as billet, billet, round billet, etc. Such equipment generally has other processes behind it, such as heating the billet and rolling it into steel bars and wire rods.

Billet rolling equipment price

Industrially used for billet rolling equipment can be divided into cold billet heating furnace and billet, continuous casting and online reheating furnace according to different customer processes. The power of different equipment is different, and the workpieces to be heated by each customer are different. Therefore, the price of the equipment is not the same. When purchasing billet rolling equipment , you should first locate your own needs and find a larger, professional manufacturer.

How is the billet rolling equipment precisely temperature controlled?

Adopt two-point temperature measurement. In order to ensure the precise control of the temperature of the billet and the continuous casting billet during the heating process, an infrared thermometer is generally arranged at the inlet and the outlet. In addition, in order to make up for the time difference between the temperature measurement of the thermometer and improve the control sensitivity, a hot body detection device is installed at the inlet and the outlet of each group of furnaces, so that the heating furnace can be more sensitive and reliable in maintaining low power and high power switching without material and materials. .

How to choose the billet rolling equipment ?

The traditional steel rolling process is that the steel slabs obtained by steelmaking are cooled by stacking, transported to a rolling mill, and then heated by a heating furnace to be rolled into steel. This process has two drawbacks. First, the billet is pulled out from the steelmaking continuous casting machine and has a temperature of 700-900 ° C on the cold bed . The latent heat of the billet is not effectively utilized. Second, after the slab is heated by the heating furnace, the surface loss of the slab is about 1.5% due to oxidation loss . The steel-making workshop energy-saving and emission reduction technology transformation project implements continuous casting and rolling for the above problems, but the second point defect is still used in the regenerative heating furnace . In order to fully save energy, it is more suitable to use the slab rolling equipment to carry out on-line heating and uniform temperature heating of the continuous casting slab.

The role of billet rolling equipment ?

The billet warming and heating furnace is a continuous casting billet (small billet, slab, round billet, rectangular billet) which is heated by the heating furnace before entering the rolling mill to realize continuous casting and rolling production. The heating capacity of the whole billet is heated to 1100 ° C , and the temperature uniformity is passed through the induction heating furnace to ensure that the temperature uniformity of the billet is better than the natural state before heating.

Understand Wikipedia： induction heating

Recommended Reading： billet induction heating furnace

Recommended Reading： Billet Induction Heating Equipment

PREV：Billet online heating equipment

NEXT：Continuous casting billet induction heating furnace

[ BACK ]