250kg induction melting furnace

Introduce：A good way to quickly select the 250kg induction furnace,The 250kg induction melting furnace is an induction melting furnace that provides 250kg induction melting furnace price, 250kg induction melting furnace related configuration, transformer, incoming line voltage, furnace structure selection and The method of determining energy consumption.

Consultation

Related Products

Related Pictures

Introduction

Consultation

The composition of 250kg induction melting furnace :

200kw intermediate frequency power supply - capacitor cabinet - aluminum shell furnace body - 231 reducer tilting system - remote control box ZXZ-25T closed loop cooling tower.

The price of 250kg induction melting furnace?

The price of the 250kg induction melting furnace is calculated according to the power of the intermediate frequency power supply and the volume of the furnace body. Different configuration prices vary. This price is for reference only. For specific prices, please contact: firstfurnace@gmail.com

Serial number	Item name	Specification model	unit	Quantity	Price¥
1	IF power cabinet	200KW/0.25T/1500HZ	station	1	40000
2	Capacitor cabinet	0.75-1000-1S	set	1	10000
3	0.25Taluminum shell body	GW- 0.25T	set	1	15000
4	Water cooled cable	LHSD- 24 0	root	2	5000
5	Model	0.25T furnace dedicated	only	1	500
Total: ¥ 70,500

The choice of 250kg induction melting furnace related configuration

Intermediate frequencypower supply	Working form: parallel inverter structure or inverter series structure ( one electric two furnace )
	Rectified form: 3- phase 6- pulse
	Output power: 200kw
	Power efficiency ≥98%
	Start mode: buffer frequency conversion start
	Startup rate: 100% (including heavy load)
	Rated frequency: 500HZ - 1000HZ
	AC voltage: 380v-660v
	DC voltage: 500v
	IF voltage: 750v-1500 V
	DC current: 400 A
	AC current: 320 A
	Input frequency: 50Hz
	Dimensions: 14 00 mm × 9 00mm × 2 0 00 mm ( length ×width × height)
	Weight: 1 000 KG or so
	Circulating water volume: ZXZ- 25 T
Furnace body	Rated capacity: 250 KG
	Maximum capacity: 300 KG
	Power factor: ≥0.9 8
	Working mode: one electric two furnace
	Melting time : about 45 minutes / furnace ( 1550 degrees cast iron)
	Working temperature: 1550 °C
	Maximum angle of the tilting furnace: 95°
	Yoke: Oriented 0.23 water yoke
	Outlet mode: side outlet
	Circulating water volume: ZXZ- 40 T
	Tilting method: reducer
	Unit power consumption: ≤ 6 5 0 ± 5% kW.h/t 1550 ° C
	Working voltage: 3200V
	Dimensions: 2020 × 2260 × 1650
	Weight: 1500kg or so
transformer	Rated capacity: 315 KVA
	Primary voltage: 10KV
	Secondary voltage: 400 V / 6 phase rectification series
	One phase: 3 phase
	Secondary phase number: 3 phase 6 veins
	Output form: three △ three Y

250kg induction melting furnace features :

1. Intelligent system, fast protection, durable thyristor, good starting performance, stable operation and convenient operation.

2 , the use of large copper discharge machine, increase the reactor power saving.

3 , induction melting furnace has over voltage, over current, water temperature, water pressure, short circuit, grounding and other protection systems, the operating panel has a working parameter display table , display various parameters of the working state, and there are faults, temperature and other indications.

250kg induction melting furnace appearance structure

5. What information does the customer need to provide to the supplier before purchasing the induction melting furnace?

1. Induction melting furnace should have space for layout, and it is necessary to provide the area and layout of the plant.

2. The customer needs to provide the capacity of the transformer, the magnitude of the incoming line voltage, and the frequency of the incoming line voltage.

3. The induction melting furnace requires water-cooling equipment, and the induction melting furnace configuration contains water-cooling equipment.

4. The furnace structure of the induction melting furnace has a steel shell furnace body and an aluminum shell furnace body, and the customer needs to specify the furnace body structure.

5. The power supply of the induction melting furnace is an intermediate frequency power supply. The circuit structure of the intermediate frequency power supply is divided into an inverter parallel connection and an inverter series structure. The inverter series structure is energy-saving, the power factor is 0.98, and the line is stable. The inverter parallel structure is of the common type with a power factor of 0.92, which requires the customer to specify the line structure.

A good way to correctly and quickly select " 250kg induction melting furnace "

1. Induction melting furnace transformer capacity selection

The 250kg induction melting furnace should be a 315KVA transformer. Secondary output voltage is 380v

Selection basis: value of transformer capacity = value of induction melting furnace power supply x 1.2

The transformer is a rectifier transformer. In order to reduce the interference of harmonics, it is used as far as possible for the special plane, that is, one induction melting furnace is equipped with a rectifier transformer.

1. Selection of 250kg induction melting furnace inlet voltage

250kg induction melting furnace power is 200kw, three-phase five-wire system 380V , 50HZ industrial power

2.Selection basis: For medium frequency power supply for induction melting furnace below 1000KW , three-phase five-wire 380V , 50HZ industrial power is generally used , and for induction melting furnace above 1000KW , the focus is on using 660V incoming voltage .

3. The capacity tonnage requirements to determine how much selected induction melting furnace.

The capacity of the induction melting furnace can be determined by the weight of the individual pieces and the weight of the molten iron required for each working day .

The standard tonnage is as follows:

250kg induction melting furnace

50 0kg induction melting furnace

1T induction melting furnace

2T induction melting furnace

3T induction melting furnace

5T induction melting furnace

Selection of 250kg induction melting furnace body structure

250kg capacity induction melting furnace is small, it is recommended to select: the furnace is aluminum reducer tilting furnace configuration mode

The aluminum alloy structure commonly known as the aluminum alloy structure with the reducer as the tilting furnace method. The induction melting furnace of the steel structure with the hydraulic cylinder as the tilting furnace is commonly called the steel shell furnace. The steel shell furnace is a steel structure, and the aluminum shell furnace shell material is an aluminum alloy .

Determination of energy consumption of 250kg induction melting furnace

The power supply of the induction melting furnace is more power-saving, the energy consumption of 250kg induction melting furnace and molten iron: 580KW.h/t , energy consumption of molten steel 6 5 0 KW.h/t .

How to choose the induction melting furnace lining material?

1. Induction melting furnace lining material is divided into acid lining material, alkaline lining material, neutral lining material, coil cement, root melting material, medium frequency electric furnace tonnage, product molding temperature is different, it is very important to choose the appropriate lining material. jobs.

2. Induction melting furnace is a molten steel furnace using alkaline lining material mainly for fused magnesia. The induction melting furnace is a molten iron furnace. The acid lining material is a refractory material for quartz coreless induction furnace, and the material is acidic.

How to increase the melting speed of the induction melting furnace?

1. Increase the power of the induction frequency melting furnace intermediate frequency power supply.

2. Choose a reasonable charge size and the correct feeding method.

3. Appropriate molten iron outlet temperature.

Understand Wikipedia： induction furnace

Recommended Reading： Induction melting furnace