Hot search: 3KW electromag
Aluminum ingot
1T one belt tw
2T steel melt
square steel medium frequency induction heating equipment
square steel medium frequency induction heating furnace
square steel medium frequency forging furnace
Square steel heating furnace
Square steel heating electric furnace
Square steel induction heating furnace
square steel forged medium frequency heating furnace
Square steel forging heating equipment
Billet electric heating furnaceSquare billet electric induction heating furnace
Square steel forged heating electric furnaceEquipment name: square billet electric induction heating furnace
Non-standard customization: yes
Billet size: width 50mm × 50mm or more, length 0.5 meters or more
Square billet electric induction heating furnace is excellent and technically advanced ! Intelligent series resonant induction heating power supply control, billet heating equipment energy saving 10%-30% , customized human-machine interface, highly user-friendly operation instructions, can be used for different countries and The area provides the corresponding language switching, and the square billet electric induction heating furnace is easy to operate.
The square billet electric induction heating furnace adopts PLC to control its characteristics:
● Provide remote operation console with touch screen or industrial computer system according to user requirements.
● Specially customized human-machine interface, highly humanized operation instructions, one person can operate the whole set of equipment, saving labor and expenses.
● All-digital, high-depth adjustable parameters, as long as the input steel type, size, equipment automatically call the relevant parameters, no manual recording, review, input. High-precision history curve function. U-disk or backup network may be, data can be permanently stored.
● Strict grade management system, square billet induction heating furnace with a key reduction system. (If there is a problem with the adjustment, or if you want the device to return to its original state, you can restore the original data with the push of a button)
Square billet electric induction heating furnace adopts intermediate frequency series resonant power supply to control its characteristics:
● Parallel resonance design, phase shifting and power adjustment, the equipment is mature and stable; it has more advantages in the high power range above 3000KW .
● DSP control, the speed capture lock phase starts, meets frequent start and stop, and has high success rate.
● Variable frequency variable load adaptation, frequency adaptation range 200-10000Hz, induction furnace replacement automatic matching, no manual adjustment is required.
● T2 copper copper row in the cabinet , sandblasted and passivated; low leakage and anti-oxidation, effectively reducing line loss.
● Full touch screen control, pure digital setting, complete process record and strict hierarchical authority. The main parameters can be restored to the factory settings with one key.
● Power single unit power 50-6000KW , frequency 200-10000Hz.
Square billet electric induction heating furnace induction heating coil is a contour design, copper tube is wrapped with T2 oxygen-free copper, copper tube wall thickness ≥2.5mm, furnace body insulation material is selected from the United States imported knotting material, high strength, high temperature resistance, use The service life is longer; the inlet and outlet ends of the steel billet secondary heating equipment are packaged with 5mm copper plate, which greatly reduces the magnetic leakage and prolongs the service life. The frame structure of the furnace body is made of non-magnetic stainless steel or aluminum alloy to reduce the influence of magnetic flux leakage and heat on other devices. Square steel billet induction heating equipment is equipped with one water-cooled idler roller between each two furnaces. Each roller is equipped with a variable frequency speed regulating motor to ensure stable and uniform operation of the billet.
The billet is driven by the motor and the idler at a constant speed in the induction heater. The billet is heated uniformly, the heat loss is less, and the heating efficiency is high. The discharge port is equipped with the American Leitai thermometer to display the billet heating temperature in real time and keep the workpiece. Uniformity. The slab heating furnace is automatically higher than the general equipment, which is convenient for operation and has a high degree of online intelligence for other equipment. The square billet electric induction heating furnace is evenly heated, and the steel billet after heat treatment has no cracks, no over-burning, no straightening machine for straightening, tensile strength and toughness, and can meet customer needs.
The conditions for the use of square billet electric induction heating furnace and the user-supplied part:
1 . The user provides the high-voltage side power supply of the transformer, the electrical connection line of the transformer to the low-voltage distribution cabinet and the power supply cabinet, and the console enters the line.
2 . Altitude: ≤ 2000m; Relative humidity: ≤ 90%
3 . Equipment cooling: The total flow of the whole set of equipment is greater than or equal to 200 cubic meters per hour. Pressure ≥ 0.3MPa
4 . No conductive dust and corrosive gases.
Square billet electric induction heating furnace parameter summary table
Billet size | Billet length | Heating temperature | Production capacity |
60 × 60mm | 3m-4m | 1150 | 25T/H |
75 × 75mm | 3m-4m | 1150 | 25T/H |
100 × 100mm | 2m | 1150 | 7T/H |
120 × 120mm | 1150 | 30T/H | |
120 × 120mm | 11.5-12.5m | 1150 | 90T/H |
125 × 125mm | 6m | 1150 | 8T/H |
125 × 125mm | 2m | 1150 | 7T/H |
130 × 130mm | 6m | 1150 | 50T/H |
135 × 135mm | 6m | 1150 | 100T/H |
150 × 150mm | 11.5-12.5m | 1150 | 70T/H |
What is the square billet electric induction heating furnace used for?
Square billet electric induction heating furnace is used for induction heating such as billet, billet, round billet, etc. Such equipment generally has other processes behind it, such as heating steel billets and rolling into steel bars and wire rods.
Square billet electric induction heating furnace price
The electric induction heating furnace for square billet in the industry can be divided into cold billet heating furnace and billet, continuous casting and online temperature heating furnace according to different customer processes. The power of different equipment is different, and each workpiece to be heated by customers It is also different, so the price of the equipment is not the same. When purchasing a billet electric induction heating furnace , you should first locate your own demand and find a larger, professional manufacturer.
How is the square billet electric induction heating furnace precisely controlled?
Adopt two-point temperature measurement. In order to ensure the precise control of the temperature of the billet and the continuous casting billet during the heating process, an infrared thermometer is generally arranged at the inlet and the outlet. In addition, in order to make up for the time difference between the temperature measurement of the thermometer and improve the control sensitivity, a hot body detection device is installed at the inlet and the outlet of each group of furnaces, so that the heating furnace can be more sensitive and reliable in maintaining low power and high power switching without material and materials. .
How to choose square billet electric induction heating furnace ?
The traditional steel rolling process is that the steel slabs obtained by steelmaking are cooled by stacking, transported to a rolling mill, and then heated by a heating furnace to be rolled into steel. This process has two drawbacks. First, the billet is pulled out from the steelmaking continuous casting machine and has a temperature of 700-900 ° C on the cold bed . The latent heat of the billet is not effectively utilized. Second, after the slab is heated by the heating furnace, the surface loss of the slab is about 1.5% due to oxidation loss . The steel-making workshop energy-saving and emission reduction technology transformation project implements continuous casting and rolling for the above problems, but the second point defect is still used in the regenerative heating furnace . In order to fully save energy, it is more suitable to use the square billet electric induction heating furnace to carry out on-line heating and uniform temperature heating of the continuous casting billet.
The role of square billet electric induction heating furnace ?
The billet warming and heating furnace is a continuous casting billet (small billet, slab, round billet, rectangular billet) which is heated by the heating furnace before entering the rolling mill to realize continuous casting and rolling production. The heating capacity of the whole billet is heated to 1100 ° C , and the temperature uniformity is passed through the induction heating furnace to ensure that the temperature uniformity of the billet is better than the natural state before heating.
Copyright© 2007-2013 NO.6 Electric Mall All Rights Reserved
