Hot search: 3KW electromag
1T one belt tw
Aluminum forgi
15KW electroma
Bearing sleeve heater
Gear heating automatic equipment
Rolling mill bearing heater
DM-1000steam turbine guardring induction heater
Flat bearing heater
Pulley heater
Inner bore bearing heater
Ds-2000 Induction Heater-Hub Heater
Combined bearing heater
Multi-station drum induction heater
Multi-station gear heaterGear heater
Gear heating with automatic equipment
Gearbox housing heater details
Ds-1000bearing induction heater
Ds-800 steam turbine guard ring induction heater
Ds-600 bearing induction heater-bearing induction heaterGear heater details
The GHJ- N ( W ) gear heater is a highly efficient induction heating method using frequency conversion technology. The principle is to turn the power frequency power supply into a frequency of around 20KHZ and increase the frequency tracking technology. The heating device can be operated in an optimum state in the case where the workpiece to be heated is different. The thermal efficiency of its energy conversion can reach more than 98% .
The gear heater solves the problem of small-diameter large workpieces that cannot be solved by the power frequency heating assembly in the field of thermal assembly. ( The heating of the power frequency thermal assembly is caused by the iron core , so that there is a variable magnetic field in the workpiece ) and the gear heater does not need iron core ( silicon steel sheet ) . The inductor consists of a copper coil and a ferrite. (The sensor is made according to the hole size of the workpiece. ) The sensor is placed in the bore of the heated workpiece. After turning on the power, quickly heat the workpiece. The gear heater is a high-efficiency induction heating method that uses frequency conversion technology to replace thyristors with IGBT tubes.
Gear heaters have the advantages of fast heating speed, high thermal efficiency, light weight and durability. And set three control modes: 1. Time control 2. Temperature control 3. Temperature maintenance. And has an automatic demagnetization function.
Gear heater selection parameters
Device Name: | Gear quick induction heater |
Equipment model: | GHJ-N (series); GHJ-W (series) |
equipment power: | 2-10 KW |
voltage: | 220V/two phase; 380V/three phase |
working frequency: | 10-20 KHz |
Heating the workpiece size: | Customized on demand |
Number of workpieces heated at one time: | Can do multi-station selection |
heating method: | Induction heating |
Control mode: | 1. Temperature control (0-240 ° C) 2. Time mode (0-99'59'') 3. Insulation control (constant temperature difference -3 °C) |
Cooling device: | Forced air cooling |
Overheating protection: | Have |
Copyright© 2007-2013 NO.6 Electric Mall All Rights Reserved
