100kg atomizing powder special melting furnace

Introduce：100kg atomizing powder special melting furnace,100kg atomizing powder special melting furnace manufacture,100kg atomizing powder special melting furnace price

Consultation

Related Products

Related Pictures

500 kg copper powder atomizing melting furnace used on site

Introduction

Consultation

First, the equipment description

Overview of 100kg atomized powder special melting furnace: This product belongs to the new atomizing and milling equipment, special melting furnace for atomization and milling, unique hydraulic tilting rod linkage mechanism, which can always be in the process of melting and pouring out the melt. Pour the metal solution into the small diameter of the receiving port, which is the equipment required to produce metal powder and similar processes by water (gas) atomization process.

The furnace body and hydraulic tilting mechanism of 100kg atomized powder special melting furnace . The furnace body runs at a uniform speed, the height difference of the nozzle is small, and the liquid discharge is continuously stable. The running curve of the nozzle is fixed by the trajectory and optimized by the computer. The special curved template is used to guide the locking, so that the furnace body is uniformly and orderly discharged from the continuous liquid discharge to the fixed point. The tilting angle of the furnace body: 0～95° (0° refers to the horizontal position of the furnace mouth); the furnace has high stability of turning, and the positioning accuracy of the discharge port is high (the distance between the outlet and the leakage of the melting furnace is less than 50mm), and the pouring center changes. The error is small, the nozzle does not move back and forth when atomizing the steel, and the precision of the fixed point casting is high, and the front and back error does not exceed 30 mm, and the stability of the metal liquid flow is ensured. The maintenance and replacement of complete sets of equipment adopts modular design, easy maintenance and easy maintenance, which greatly improves production efficiency.

图片3.png

100kg atomization powder special melting furnace technical parameters

model	Rated Capacity	rated power	frequency	Line voltage	IF output voltage	Melting time	power consumption	transformer
model	T	KW	KHZ	V	V	Minutes/T	KWH/T	KVA
KGPS-15	0.015	50	2.5	380	750	40	680	30
KGPS-50	0.05	100	2.5	380	750	40	680	100
KGPS-100	0.1	160	2.5	380	750	50	650	160
KGPS-200	0.2	250	2.5	380	750	60	640	250
KGPS-300	0.3	300	2.5	380	750	60	640	315
KGPS-500	0.5	400	2	380	750	40	640	430
KGPS-1000	1	800	1	380	750	60	640	1000

What are the main production costs of atomized metal powder?

The main cost is electricity, followed by gas (if it is aerosolization), water (if it is water atomization)

Water atomizing method milling process for preparation of metal powder:

First, the metal or alloy is melted and refined in the induction furnace, and the molten metal liquid is poured into the heat preservation crucible. During the flow of the metal liquid along the guide tube, the ultra-high pressure water flows through the nozzle to break the metal liquid into a large number of fine metal droplets, and is small. The droplets form sub-spherical or irregular shaped particles under the action of surface tension and rapid cooling of water during flight. The atomized metal particles are solidified, settled in the atomization tower, and finally fall into the powder collecting tank. Collect and separate. Moreover, by adjusting different parameters in the milling process, metal powders of various particle size distributions and morphologies can be obtained, thereby better satisfying mechanical manufacturing, automobile industry, aerospace and metal injection molding, friction materials, oil-impregnated bearings, A wide range of requirements in the field of powder metallurgy, such as structural parts and diamond tools.