Insulation ladle

Introduce：Main parameters and price of insulation ladle,main selection method of insulation ladle, use and maintenance of insulation ladle, characteristics of insulation ladle,hot metal insulation ladle, manufacturer of aluminum water insulation ladle

Consultation

Insulation ladle details:

Insulation ladle use
The ladle is used for casting in the foundry. After the iron is taken in front of the furnace, it is transported to the mold for pouring.
Main selection method of insulation ladle
1 , hanging bag form, two-way rotary type.
2 , the form of gearbox, double worm gear drive.
3 , speed ratio
4 , the size
Main parameters and price of insulation ladle
This price is for reference only. Contact us will have a very low price, please consult the specific price. firsTfurnace@gmail.com

specification	Upper port diameter Φ 1 ( mm )	Lower mouth diameter Φ 2 ( mm )	Barrel height H (mm )	Width A (mm )	Height B (mm )	Price ¥ (yuan)
Bwb-0.3	Φ 520	Φ 470	540	1070	1310	¥ 5000 Yuan
Bwb-0.5	Φ 606	Φ 546	590	1136	1349	¥ 6,000 yuan
Bwb-0.75	Φ 643	Φ 583	665	1207	1456	¥ 7,000 yuan
Bwb-1	Φ 722	Φ 652	740	1260	1479	¥ 50000 Yuan
Bwb-1.5	Φ 830	Φ 750	860	1380	1856	¥
Bwb-2	Φ 897	Φ 810	910	1437	1890	¥ 8000 Yuan
Bwb-2.5	Φ 943	Φ 853	960	1550	2057	¥ 50000 Yuan
Bwb-3	Φ 1020	Φ 920	1035	1621	2131	¥ 50000 Yuan
Bwb-3.5	Φ 1045	Φ 945	1070	1634	2157	¥ 50000 Yuan
Bwb-4	Φ 1132	Φ 1020	1145	1719	2183	¥ 50000 Yuan
Bwb-5	Φ 1230	Φ 1110	1248	1887	2525	¥ 50000 Yuan
Bwb-7	Φ 1368	Φ 1238	1337	2030	2678	¥ 50000 Yuan
Bwb-8	Φ 1418	Φ 1278	1428	2402	2960	¥ 10000 Yuan
Bwb-10	Φ 1542	Φ 1402	1592	2525	3095	¥ 50000 Yuan
Bwb-12	Φ 1640	Φ 1480	1652	2700	3283	¥ 50000 Yuan
Bwb-15	Φ 1765	Φ 1586	1785	2815	3540	¥40000 yuan
Bwb-20	Φ 1930	Φ 1736	1973	3010	3870	¥ 50000 Yuan
Bwb-25	Φ 2090	Φ 1878	2131	3420	4050	¥3 0000 yuan
Bwb-30	Φ 2245	Φ 2015	2296	3780	4200	¥ 50000 Yuan
Bwb-40	Φ 2540	Φ 2315	2675	4090	5225	¥ 50000 Yuan
Bwb-45	Φ 2665	Φ 2395	2740	4350	5340	¥ 50000 Yuan
Bwb-50	Φ 2756	Φ 2467	2895	4600		¥ 50000 Yuan

Insulation ladle features
1. Reasonable selection of the center of rotation, easy to operate, basically can be re-created after pouring.
2 , the use of double worm gear drive. Although the manufacturing requirements are high, the transmission is flexible and the two-way reversibility is good.
3. The lifting rod is made of forging, which is safer and safer than steel welded parts.
4 , the body plate is thicker, the bottom structure is triple-insurance combined with taper, bottom hoop and welding, which prolongs the service life and ensures the safety of the operator.
5 , the main body and the boom, the reduction box and the hand wheel are equipped with a chain card to lock at any time.
6 , the two trunnions and the boom are equipped with self-aligning bearings, and the consistency is good.
Use and maintenance of the insulation ladle
1. 搪 refractory mud, the thickness of which is:
   0.5 ton to 3 ton side wall 60 mm bottom 80 mm;
   5 tons of side walls 80 mm bottom 100 mm;
   10 tons of side wall 100 mm bottom 120 mm;
   More than 10 tons of side walls 150 mm bottom mm;
2 , check the hand wheel, should live freely, no jamming phenomenon.
3 , in the two trunnion rolling bearings, add molybdenum disulfide grease once a week.
4. Check if the handwheel locks the card board safely and reliably.
5. Check if there is any oil shortage in the gearbox and check it once a week.
6. After using for a long time, it is found that the gap of the worm gear is increased, and the worm gear pair should be replaced when it is safe to pour.