molten Aluminum ladle

Introduce：main parameters and price of molten Aluminum ladle, main choice method of molten Aluminum ladle,use and maintenance of molten Aluminum ladle, molten Aluminum ladle feature , moten Aluminum ladle manufacturer

Consultation

molten Aluminum ladle detailed description:

molten Aluminum ladle use
The ladle is used for casting in the foundry. After the iron is taken in front of the furnace, it is transported to the mold for pouring.

molten Aluminum ladle main selection method
1 , hanging bag form, two-way rotary type.
2 , the form of gearbox, double worm gear drive.
3 , speed ratio
4 , the size
molten Aluminum ladle main parameters and prices
This price is for reference only. Contact us will have a very low price, please consult the specific price. firstfurnace@gmail.com

CB manual, electric molten Aluminum ladle technical parameters

GB manual, electric molten Aluminum ladle technical parameters:
Executive Standard JB/T6685-2006

specification	Upper mouth diameter Φ1 (mm)	Lower mouth diameter Φ2 (mm)	Barrel height H (mm)	Width A (mm)	Height B (mm)
GB-0.5	644	584	740	1230	1600
GB-1	770	710	880	1320	1955
GB-1.5	870	780	1000	1425	2150
GB-2	950	850	1100	1560	2210
GB-2.5	1040	940	1160	1615	2430
GB-3	1132	1088	1188	1688	2530
GB-4	1224	1104	1300	1710	2700
GB-5	1293	1173	1350	1880	2865
GB-6	1408	1268	1400	1980	3275
GB-7	1479	1337	1535	2215	3392
GB-8	1550	1400	1675	2450	3510
GB-10	1629	1469	1750	2530	3680
GB-12	1720	1550	1878	2565	3850
GB-15	1855	1675	1950	2600	4020
GB-20	1985	1785	2150	2785	4560
GB-25	2110	1900	2385	2888	4900
GB-30	2204	1984	2520	2960	5070
GB-40	2525	2257	2655
GB-50	2673	2387	2863
GB-60	2815	2516	3015
GB-70	3001	2606	3288
GB-80	3123	2711	3435
GB-90	3248	2820	3571
GB-100	3358	2915	3693

molten Aluminum ladle features
1. Reasonable selection of the center of rotation, easy to operate, basically can be re-created after pouring.
2 , the use of double worm gear drive. Although the manufacturing requirements are high, the transmission is flexible and the two-way reversibility is good.
3. The lifting rod is made of forging, which is safer and safer than steel welded parts.
4 , the body plate is thicker, the bottom structure is triple-insurance combined with taper, bottom hoop and welding, which prolongs the service life and ensures the safety of the operator.
5 , the main body and the boom, the reduction box and the hand wheel are equipped with a chain card to lock at any time.
6 , the two trunnions and the boom are equipped with self-aligning bearings, and the consistency is good.
Use and maintenance of molten Aluminum ladle
1. refractory mud, the thickness of which is:
   0.5 ton to 3 ton side wall 60 mm bottom 80 mm;
   5 tons of side walls 80 mm bottom 100 mm;
   10 tons of side wall 100 mm bottom 120 mm;
   More than 10 tons of side walls 150 mm bottom mm;
2 , check the hand wheel, should live freely, no jamming phenomenon.
3 , in the two trunnion rolling bearings, add molybdenum disulfide grease once a week.
4. Check if the handwheel locks the card board safely and reliably.
5. Check if there is any oil shortage in the gearbox and check it once a week.
6. After using for a long time, it is found that the gap of the worm gear is increased, and the worm gear pair should be replaced when it is safe to pour.