Pump tube inner wall quenching equipment

Introduce：Pump tube inner wall quenching equipment

Consultation

Related Products

Related Pictures

Gear quenching equipment

Introduction

Consultation

The inner tube quenching equipment of the pump tube consists of three parts:

1, IGBT super audio induction heating equipment.
2. A set of tooling matched with the power supply: The quenching of the inner wall of the pump tube is required to be uniform during quenching. The pump tube must be moved at a uniform speed along the shaft. When the pump tube is tilted during quenching, the water during quenching can flow out.
3. Coaxial water-cooled sensor: This kind of sensor is designed by our company for quenching the pump tube. It is sprayed with water while quenching to ensure that the pump tube is not deformed.

Pump tube inner wall quenching equipment performance characteristics:
1. No external heating is required for the workpiece, and local heating can be selectively performed, so that the electric energy consumption is small and the workpiece deformation is small.
2. The surface hardened layer can be adjusted by adjusting the working frequency and power of the equipment as needed. Therefore, the martensite structure of the hardened layer is finer, and the hardness, strength and toughness are relatively high.
3, 砼 pump tube inner wall quenching equipment is easy to achieve mechanization and automation, easy to manage, can effectively reduce transportation, save manpower and improve production efficiency.
4, the heating speed is fast, the workpiece can reach the required temperature in a very short time, even within 1 second. As a result, the surface of the workpiece is oxidized and decarburized, and most workpieces do not require gas protection.
5, a multi-purpose machine. The heat treatment processes such as quenching, annealing, tempering, normalizing, quenching and tempering can be completed, and welding, smelting, hot assembly, thermal disassembly and diathermy forming can be completed.
6, easy to use, easy to operate, can be turned on or off at any time. There is no need to warm up.
7. The workpiece treated by the quenching equipment of the inner wall of the pump tube has a thick tough region under the hard surface layer, and has good compressive internal stress, so that the workpiece has higher fatigue resistance and breaking capacity.
8, can be manually operated, semi-automatic and fully automatic operation; can be used for a long time, or can be used immediately. It is conducive to the use of equipment in the preferential period of power supply low price.
9. High power utilization rate, environmental protection and energy saving, safe and reliable, workers' working conditions are good, and the state advocates.

Understand Wikipedia： Induction hardening

Recommended Reading： Induction hardening equipment

Recommended Reading： Induction hardening machine

PREV：Milling machine guide quenching equipment

NEXT：Pump tube inner wall quenching equipment

[ BACK ]

ALL GATEGORIES

Pump tube inner wall quenching equipment