Pump tube inner wall quenching equipment

Introduce：200 type concrete pump tube internal bore high frequency quenching equipment quenches the inner diameter of concrete pump tube with diameter of 125 , adopts low loss, high insulation coaxial structure inductor, induction length is 7 meters, concrete pump tube quenching hardness can reach HRC55 , concrete Pump tube quenching large travel speed 500-600 / min

Consultation

Related Products

Related Pictures

Gear quenching equipment

Introduction

Consultation

Inner wall quenching equipment induction heating quenching, using low loss, high insulation coaxial structure inductor, induction length 7 meters, concrete pump tube quenching hardness can reach HRC55 , concrete pump tube quenching large travel speed 500-600 / min, concrete pump tube inner wall Hardened layer is 1.5-1.8mm

Model: SD W-200

Input power: 200KW

Input voltage: 380V

Oscillating frequency: 15-25KHz

泵管内壁淬火设备.jpg

Application areas:

Concrete pump tube 200 within bore induction hardening apparatus may be made to the diameter of the inner bore 125 of the pump tube concrete hardening, concrete pump delivery pipe wall quenching equipment induction hardening, low loss, high dielectric coaxial structure sensors, inductive length 5 m, Concrete pump tube quenching hardness can reach HRC55 , concrete pump tube quenching large travel speed 300-400 / min, concrete pump tube inner wall hardened layer is 1.5-1.8mm

1, the inner wall of the concrete pumping performance of the induction hardening apparatus described

Concrete pump tube 200 within bore induction hardening apparatus may be satisfactory for the diameter of the inner bore 125 of the concrete pump tube quenching, concrete pump delivery pipe wall quenching equipment induction hardening, low loss, high dielectric coaxial structure sensors, inductive length 7 Meter, concretepump tube quenching hardness can reach HRC55 , concrete pump tube quenching large travel speed 500-600 / min,

2 , the high-frequency wall quenching equipment inside the concrete pump conveying pipe

The concrete pump tube is made of special material steel tube, which is quenched by internal wall and carburized chemical treatment. The hardness of the flange bushing reaches 58-60 degrees, and the service life of the pipeline is increased by 3-5 times, which saves users time and expense. The trouble of frequent replacements increases production efficiency. No concrete pump tube quenching and hardening of concrete pump pipe performance and life is not the same, through the concrete pump tube quenching can convey more than the last few million cubic meters of concrete.

3 , concrete pump inner wall quenching machine

1 , IGBT super audio power supply

2, and a power source cooperating tooling: Requires uniform quenching pump pipe wall quenching, requires uniform motion along the axis of the pump tube, pump tube is inclined at the time of quenching, quenching can make the water flow out.

3 , coaxial water-cooled sensor system: This sensor is designed by our company for pump tube quenching. Water is sprayed while quenching to ensure that the pump tube is not deformed.

Fifth, the main technical selection method of concrete pump high frequency quenching equipment

Input power 200KVA, three-phase 380 ± 10, oscillation frequency 50-60HZ 25-35KHZ, cooling water pressure ≥ 0.05MPa weight 450kg host volume 1450 × 480 × 1000mm3 extension 500 × 600 × 1000mm3

Understand Wikipedia： Induction_hardening

Recommended Reading： Induction hardening equipment

Recommended Reading： Induction hardening machine

PREV：Pump tube inner wall quenching equipment

NEXT：Induction hardening equipment

[ BACK ]

ALL GATEGORIES

Pump tube inner wall quenching equipment